How Much Does Machinery Shifting Cost in Bangalore?
A practical breakdown of machinery shifting costs in Bangalore — what drives the price, what to expect, and how to get an accurate quote for your specific project.
Machinery shifting costs in Bangalore range from ₹5,000 for a small single-machine local move to over ₹5 lakh for a complete factory relocation. The variation is wide because the underlying variables are wide. This guide breaks down exactly what drives the price so you can budget realistically for your project.
The Five Cost Drivers
1. Machine Weight
Weight determines crane size, and crane size determines the largest single cost in most machinery moves. A 5-tonne hydra crane rents for roughly ₹5,000–₹8,000 per shift. A 20-tonne mobile crane costs ₹18,000–₹30,000 per shift. A CNC machining centre that weighs 4 tonnes costs less to crane than a hydraulic press that weighs 12 tonnes — even if both machines look similar in size.
If you don’t know your machine’s weight, look for the machine nameplate (usually a metal tag on the frame). It should list the gross weight. If you can’t find it, a machinery shifting company can estimate it from the machine model.
2. Site Access Conditions
Access conditions determine how long the job takes — and time is money. A machine in a Peenya Stage 2 shed with a 4-metre gate, low ceiling, and narrow internal aisles takes significantly longer to move than the same machine in a Bommasandra estate with a wide yard and good crane positioning room.
Common access factors that increase cost:
- Narrow factory gates requiring crane repositioning
- Low ceilings preventing overhead crane use, requiring skid-based horizontal movement
- Soft ground requiring timber mats for crane outrigger placement
- Multiple machines sharing a single crane setup window
3. Distance
Distance affects transport vehicle time, fuel, and sometimes toll and road permit costs for oversized loads. A move within the same Peenya stage might cost ₹2,000–₹4,000 for transport. A move from Peenya to Hosur Road adds significantly more.
For inter-state moves — to Chennai, Hyderabad, or Pune — distance also adds permit costs (E-way bill, state road permits for oversized loads) and transit insurance.
4. Service Complexity
A basic load-and-carry job (crane loads machine onto truck, truck delivers, crane unloads) is the simplest billing model. Complexity increases with:
- Dismantling required: Machines that need sub-assemblies removed before they can be lifted add labour time
- Installation and leveling: Precision leveling at the destination, particularly for CNC machines to 0.02mm/m tolerance, adds time and specialized equipment
- Documentation: Automotive-quality management systems may require written lift plans, condition photographs, and OEM coordination — all of which are legitimate costs
5. Timing
Emergency moves — same-day or next-day deployment — carry a 20–40% surcharge over standard rates. Weekend work is typically charged at standard rates (not premium) but requires earlier booking confirmation since crew scheduling is tighter.
Benchmark Prices in Bangalore (2025)
| Service | Typical Range |
|---|---|
| Single machine shift (under 5T, local) | ₹8,000 – ₹18,000 |
| Single machine shift (5T–15T, local) | ₹15,000 – ₹35,000 |
| CNC machine relocation (local, 4–10T) | ₹15,000 – ₹40,000 |
| 8T hydra crane (8hr shift) | ₹6,000 – ₹9,000 |
| 20T mobile crane (8hr shift) | ₹18,000 – ₹28,000 |
| Factory relocation (10–15 machines) | ₹1.5 lakh – ₹4 lakh |
| Emergency deployment surcharge | +20% – 40% |
These are market ranges for Bangalore. Actual quotes depend on site-specific factors that cannot be assessed without a visit.
Why “Price Per Hour” Estimates Are Misleading
Many customers ask for an hourly rate. The problem is that an hourly estimate for a job that hasn’t been surveyed is guesswork. A 4-hour job can become an 8-hour job if:
- The access path requires unexpected crane repositioning
- The machine turns out to be heavier than the customer estimated
- The floor in the old factory is grouted and needs cutting before the machine can be lifted
- The new factory’s power supply isn’t ready, causing a hold on the site
A written quote after a site survey eliminates most of these surprises. Any company quoting by phone without seeing the site is quoting on assumptions.
How to Get an Accurate Quote
- Confirm machine weight from the nameplate or OEM manual
- Photograph the access path — the gate, the internal aisle, the overhead clearance
- Confirm the destination — address, floor type, access width
- Note any unusual features — grouted base, missing rigging points, second-floor location
- Call for a site visit — the quote after a visit is the price you can actually rely on
For most projects in Bangalore, we schedule a free site visit within 24–48 hours and provide a written quote within that same visit.